How Does One Find Out How to Waterproof a Basement?

The basement waterproofing systems and their working.

 Let’s take a look at the time and tested waterproofing of basement and how it works.

In case you are curious to know how the basement is built, you will see that the idea was first conceived in the design and then the next steps follow. It starts with the digging of a big hole, then the footer or foundations are laid. After the base is done, the walls of the basement are built and then only the rest of the house is constructed.

 That big hole in the ground, the first on the list above is important to note.

 The construction of basement walls invariably leaves a void on the exterior which requires backfilling. This void gets filled with loose backfill. No matter how well the backfill is compacted, it is still backfill and water seeks the places of little resistance.

Water will continuously seep into this area. Sometimes, creating a problem is the drainpipe that gets full of silt contained in many systems when waterproofing a basement. The water is naturally bringing all sorts of suspension with it. When these pipes get filled the system overloads and a lot of water pressure gets applied to the outside walls of the basement. Water will work its way through even the smallest gaps, even though basement walls are waterproofed in some way.

 This kind of situation is persistent because the tubes that should drain the excess water eventually deteriorate.

 A lot of the time a huge mistake is made by not providing access to these pipes. To keep water out of a basement waterproofing is also applied to the external walls. Usually this is called a tanked system.

A better basement waterproofing system, such as the drained cavity basement waterproofing system, works by getting rid of the water pressure on the walls. Water is controlled, collected and allowed to flow through hidden drainage channels either to natural drainage or to a sump pump where the water is removed away from the property.

Waterproofing a basement is a better system when they are installed internally and have easy access ports for removing the silt etc. It takes minimal disturbance to the original basement where traditional tanking or other methods have failed.

So to summarise, a good basement waterproofing system will:

 - usually be a permanent or long-term solution
 - stop both ways by which water can enter through the walls and up from the floor
- not disturb landscaping, decks, patios, driveways, etc
- usually be an approved waterproofing method for home loans
- often be substantially cheaper than other waterproofing methods

You want to be sure to choose a reliable waterproofer for your home, keep in mind that it will greatly increase the value by far more than what you initally paid.

In conclusion, you want a basement waterproofing system that will deliver:

 - a permanent or long term fix
- stop water through the floor and walls
- not disturb the exterior appearance of your home
- an approved method by home loan lenders
- more affordable than other methods

You should look at waterproofing not as an expense but as an investment in the value of your home.